<b>Lithium Batteries and NC Accus</b><p>
<author>Created by librarian@cadsoft.de</author><b>LI BATTERY</b> Sonnenschein>NAME>VALUELithium3V6LI BATTERY Sonnenschein>NAME>VALUE<b>LI BATTERY</b> Sonnenschein<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE<b>SUPPLY SYMBOL</b><b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE<b>SUPPLY SYMBOL</b><b>National Semiconductor</b><p>
http://www.national.com<br>
<author>Created by librarian@cadsoft.de</author><b>Small Outline Transistor</b>3412>NAME>VALUESmall Outline TransistorGND>NAME>VALUE<b>Ultra-Low Quiescent Current LDO Voltage Regulator</b><p>
Source: <a href="http://www.national.com/ds/LM/LM2936.pdf"> Data sheet</a><b>Field Effect Transistors</b><p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
Symbols changed according to IEC617<p>
All types, packages and assignment to symbols and pins checked<p>
Package outlines partly checked<p>
<p>
JFET = junction FET<p>
IGBT-x = insulated gate bipolar transistor<p>
x=N: NPN; x=P: PNP<p>
IGFET-mc-nnn; (IGFET=insulated gate field effect transistor)<P>
m=D: depletion mode (Verdrängungstyp)<p>
m=E: enhancement mode (Anreicherungstyp)<p>
c: N=N-channel; P=P-Channel<p>
GDSB: gate, drain, source, bulk<p>
<p>
by R. Vogg 15.March.2002<b>TO 202 horizontal</b>>NAME>VALUE123TO 202 horizontal>VALUE>NAME<b>N-Channel Enhancement MOSFET</b> 200V; 1.5A; 1,6Ohm<b>Berg Connectors</b><p>
Based on the following source:
<ul>
<li>http://catalog.fciconnect.com
</ul>
<author>Created by librarian@cadsoft.de</author><b>USB connector</b>>NAME>VALUEE L E C T R O N I C SUSB connector>NAME>VALUEUSB<b>BERG</b> USB connectorDummy symbols<b>RESISTOR</b><b>Connectors from Cypress Industries</b><p>
www.cypressindustries.com<br>
<author>Created by librarian@cadsoft.de</author><b>MINI USB-B R/A DIP</b><p>
Source: http://www.cypressindustries.com/pdf/32005-601.pdf>NAME>VALUE<b>MINI USB-B R/A SMT W/ REAR</b><p>
Source: http://www.cypressindustries.com/pdf/32005-201.pdf>NAME>VALUE<b>MINI USB-B R/A SMT W/O REAR</b><p>
Source: http://www.cypressindustries.com/pdf/32005-301.pdf>NAME>VALUE<b>USB B Type Single Solder</b><p>
Source: http://www.cypressindustries.com/pdf/85-32004-40x-1.pdf>NAME>VALUE<b>MINI USB 4P R/A SMT</b> Two Salient Point<p>
Source: http://www.cypressindustries.com/pdf/32005-101.pdf>NAME>VALUE<b>USB B TYPE SINGLE R/A DIP</b> With Rear Shell, Without Rear Shell<p>
Source: http://www.cypressindustries.com/pdf/85-32004-10x.pdf>NAME>VALUE<b>1394-4P R/A SMT W/ SIDE FLANGE</b><p>
IEEE1394 4 Pin Firewire Connector<br>
Source: http://www.cypressindustries.com/pdf/85-32006-601-1.pdf>NAME>VALUE<b>1394-4P R/A DIP TWO Legs 1.2 PITCH</b><p>
IEEE1394 4 Pin Firewire Connector<br>
Source: http://www.cypressindustries.com/pdf/85-32006-201-1.pdf>NAME>VALUEMINI USB-B R/A DIP
Source: http://www.cypressindustries.com/pdf/32005-601.pdfMINI USB-B R/A SMT W/ REAR
Source: http://www.cypressindustries.com/pdf/32005-201.pdfMINI USB-B R/A SMT W/O REAR
Source: http://www.cypressindustries.com/pdf/32005-301.pdfUSB B Type Single Solder
Source: http://www.cypressindustries.com/pdf/85-32004-40x-1.pdfMINI USB 4P R/A SMT Two Salient Point
Source: http://www.cypressindustries.com/pdf/32005-101.pdfUSB B TYPE SINGLE R/A DIP With Rear Shell, Without Rear Shell
Source: http://www.cypressindustries.com/pdf/85-32004-10x.pdf1394-4P R/A SMT W/ SIDE FLANGE
IEEE1394 4 Pin Firewire Connector
Source: http://www.cypressindustries.com/pdf/85-32006-601-1.pdf1394-4P R/A DIP TWO Legs 1.2 PITCH
IEEE1394 4 Pin Firewire Connector
Source: http://www.cypressindustries.com/pdf/85-32006-201-1.pdf>NAME>VALUE>NAME>NAME>VALUEMINI USB-B R/A DIP</b> 5pol.<p>
Source: www.cypressindustries.com<b>MINI USB-B Conector</b><p>
Source: www.cypressindustries.com<b>MINI USB 4 Pol.</b><p>
Source: www.cypressindustries.comThe new Arduino R3 'classic' adds duplicate I2C pins and an IORef pin (and an unused pinRST3v5vGndVinAnalog In012345ARefGnd131211109876543210Digital I/ODigital I/OSCLSDAIOrRST3v5vGndVinAnalog In012345ARefgnd131211109876543210Digital I/ODigital I/OSCLSDAIOr<b>CHICAGO MINIATURE LAMP, INC.</b><p>
7022X Series SMT LEDs 1206 Package Size>NAME>VALUE<B>LED</B><p>
5 mm, square, Siemens>NAME>VALUE<B>LED</B><p>
2 x 5 mm, rectangle>NAME>VALUE<B>LED</B><p>
3 mm, round>NAME>VALUE<B>LED</B><p>
5 mm, round>NAME>VALUE<B>LED</B><p>
1 mm, round, Siemens>NAME>VALUE<B>LED BLOCK</B><p>
1 LED, Siemens>NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE<b>LED HOLDER</b><p>
SiemensA+K->NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE+-<B>IR LED</B><p>
infrared emitting diode, Infineon
TO-18, lead spacing 2.54 mm, cathode marking<p>
Inifineon>NAME>VALUE<B>IR LED</B><p>
infrared emitting diode, Infineon
TO-18, lead spacing 2.54 mm, cathode marking<p>
Inifineon>NAME>VALUE<B>LED</B><p>
rectangle, 5.7 x 3.2 mm>NAME>VALUE<B>IR LED</B><p>
IR transmitter Siemens>NAME>VALUE<b>TOPLED® High-optical Power LED (HOP)</b><p>
Source: http://www.osram.convergy.de/ ... ls_t675.pdf>NAME>VALUEAC<b>BLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LB M676.pdfAC>NAME>VALUE<b>Super SIDELED® High-Current LED</b><p>
LG A672, LP A672 <br>
Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13)CA>NAME>VALUE<b>SmartLEDTM Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdf>NAME>VALUE<b>Hyper TOPLED® RG Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdf>NAME>VALUEAC<b>Hyper Micro SIDELED®</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdf>NAME>VALUE<b>Power TOPLED®</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf>NAME>VALUECACC<b>Hyper CHIPLED Hyper-Bright LED</b><p>
LB Q993<br>
Source: http://www.osram.convergy.de/ ... Lb_q993.pdf>NAME>VALUE<b>Hyper CHIPLED Hyper-Bright LED</b><p>
LB R99A<br>
Source: http://www.osram.convergy.de/ ... lb_r99a.pdf>NAME>VALUE+<b>Mini TOPLED Santana®</b><p>
Source: http://www.osram.convergy.de/ ... LG M470.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_R971.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf>NAME>VALUE<b>CHIPLED-0603</b><p>
Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br>
Package able to withstand TTW-soldering heat<br>
Package suitable for TTW-soldering<br>
Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf>NAME>VALUE<b>SmartLED TTW</b><p>
Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br>
Package able to withstand TTW-soldering heat<br>
Package suitable for TTW-soldering<br>
Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf>NAME>VALUE>NAME>VALUEAK>NAME>VALUE>NAME>VALUE>NAME>VALUESurface Mount USB Mini-B Connector>NAME>VALUE<b>Mini USB 5-pin thru-mount connector</b>
<p>
4Ucon #18732>NAME>VALUE>NAME>VALUEARDUINOUNO R3>NAME>VALUE>NAME>VALUE>NAME>VALUEThis is a new object for the new Arduino R3 - with extra pins that you may want to use (such as IOref, and duplicated A4/A5<b>LED</b><p>
<u>OSRAM</u>:<br>
- <u>CHIPLED</u><br>
LG R971, LG N971, LY N971, LG Q971, LY Q971, LO R971, LY R971
LH N974, LH R974<br>
LS Q976, LO Q976, LY Q976<br>
LO Q996<br>
- <u>Hyper CHIPLED</u><br>
LW Q18S<br>
LB Q993, LB Q99A, LB R99A<br>
- <u>SideLED</u><br>
LS A670, LO A670, LY A670, LG A670, LP A670<br>
LB A673, LV A673, LT A673, LW A673<br>
LH A674<br>
LY A675<br>
LS A676, LA A676, LO A676, LY A676, LW A676<br>
LS A679, LY A679, LG A679<br>
- <u>Hyper Micro SIDELED®</u><br>
LS Y876, LA Y876, LO Y876, LY Y876<br>
LT Y87S<br>
- <u>SmartLED</u><br>
LW L88C, LW L88S<br>
LB L89C, LB L89S, LG L890<br>
LS L89K, LO L89K, LY L89K<br>
LS L896, LA L896, LO L896, LY L896<br>
- <u>TOPLED</u><br>
LS T670, LO T670, LY T670, LG T670, LP T670<br>
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670<br>
LG T671, LOG T671, LSG T671<br>
LB T673, LV T673, LT T673, LW T673<br>
LH T674<br>
LS T676, LA T676, LO T676, LY T676, LB T676, LH T676, LSB T676, LW T676<br>
LB T67C, LV T67C, LT T67C, LS T67K, LO T67K, LY T67K, LW E67C<br>
LS E67B, LA E67B, LO E67B, LY E67B, LB E67C, LV E67C, LT E67C<br>
LW T67C<br>
LS T679, LY T679, LG T679<br>
LS T770, LO T770, LY T770, LG T770, LP T770<br>
LB T773, LV T773, LT T773, LW T773<br>
LH T774<br>
LS E675, LA E675, LY E675, LS T675<br>
LS T776, LA T776, LO T776, LY T776, LB T776<br>
LHGB T686<br>
LT T68C, LB T68C<br>
- <u>Hyper Mini TOPLED®</u><br>
LB M676<br>
- <u>Mini TOPLED Santana®</u><br>
LG M470<br>
LS M47K, LO M47K, LY M47K<br>
<p>
Source: http://www.osram.convergy.de/<p><b>Buttons</b></p>
<b>SOFTTOUCHSMD_SJ</b> - Soft touch temporary push button (Super Junk Akihabara)
<p>Compatible with SKPMANE010 [Mouser: 688-SKPMAN]</p>
<p>C&K_KSS = Digikey: KSS221GLFS</p><p><b>USB Connectors</b></p>
<b>USBMINIB</b> - Surface Mount Female Mini-B USB Connector 4UConnector: 06564</p>
<p>By microbuilder.eu</p>
Thru-hole RA Female Mini-B USB Connector 4UConnector: 18732</p>
<p>By ladyada.net</p>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.