#include <Keyboard.h>
#include <Keypad.h>

const byte ROWS = 4; // Four rows
const byte COLS = 4; // Three columns
// Define the Keymap
char keys[ROWS][COLS] = {
  {'0','1','2','3'},
  {'4','5','6','7'},
  {'8','9','a','b'},
  {'c','d','e','f'}
};
// Connect keypad ROW0, ROW1, ROW2 and ROW3 to these Arduino pins.
byte rowPins[ROWS] = {13, 5, 10, 9};
// Connect keypad COL0, COL1 and COL2 to these Arduino pins.
byte colPins[COLS] = {8, 6, 12, 4}; 

// Create the Keypad
Keypad kpd = Keypad( makeKeymap(keys), rowPins, colPins, ROWS, COLS );

#define ledpin 11

void setup() {
	Keyboard.begin();
	pinMode(ledpin,OUTPUT);
	digitalWrite(ledpin, HIGH);
                                        Serial.begin(9600);
}

//funcs:
void fmf1() {}
void fmf2() {}
void fmf3() {}
void fmfky() {Keyboard.print("Fuck You");}
void fmshl() {Keyboard.print("ssh root@192.168.1.999");}
void fmshg() {Keyboard.print("ssh -p 16969 root@225.225.225.999");}
void fmgdr() {Keyboard.print(":/mnt/GIT/gitFolder/");}
void fmezg() {Keyboard.print("ezgit");}//Keyboard.printlnm("ezgit");
void fmsbr() {Keyboard.print("source ~/.bashrc");}
void fmszr() {Keyboard.print("source ~/.zshrc");}
void fmclb() {}
void fmglp() {Keyboard.print("ezgit");}
void fmcbh() {}
void fmcbv() {}
void fmcbs() {}
void fmexr() {}




void loop() {
	char key = kpd.getKey();
	if(key) {
		switch (key) {
	      case '0':
	        fmf1();
	        break;
	      case '1':
	        fmf2();
	        break;
	      case '2':
	        fmf3();
	        break;
	      case '3':
	        fmfky();
	        break;
	      case '4':
	        fmshl();
	        break;
	      case '5':
	        fmshg();
	        break;
	      case '6':
	        fmgdr();
	        break;
	      case '7':
	        fmezg();
	        break;
	      case '8':
	        fmsbr();
	        break;
	      case '9':
	        fmszr();
	        break;
	      case 'a':
	        fmclb();
	        break;
	      case 'b':
	        fmglp();
	        break;
	      case 'c':
	        fmcbh();
	        break;
	      case 'd':
	        fmcbv();
	        break;
	      case 'e':
	        fmcbs();
	        break;
	      case 'f':
	        fmexr();
	        break;
                                                default:
                                                  Serial.println(key);
    }
    delay(100);
  }
}