Generated by EAGLE CAM Processor 9.1.3

Photoplotter Info File: /Users/max/Repos/gitea/project_Mech-Keyboard/EAGLE/Gerbers/Schematic.gpi

 Date              : 01/10/2018 22:45
 Plotfile          : /Users/max/Repos/gitea/project_Mech-Keyboard/EAGLE/Gerbers/Schematic.sts
 Apertures         : generated: 
 Device            : Gerber RS-274-X photoplotter, coordinate format 2.5 inch

Parameter settings:

 Emulate Apertures : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  0.00 %
 Tolerance Flash + :  0.00 %
 Tolerance Flash - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.5
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Apertures used:

 Code     Shape     Size                  used

 D10      draw      0.0100inch              53
 D11      rectangle 0.0592inch x 0.0710inch     6
 D12      round     0.1080inch              42
 D13      rectangle 0.1025inch x 0.1104inch    32
 D14      round     0.0415inch               2
 D15      rectangle 0.0592inch x 0.0671inch     2
 D16      rectangle 0.0277inch x 0.0671inch    22
 D17      rectangle 0.0671inch x 0.0277inch    22
 D18      rectangle 0.0631inch x 0.0533inch     4
 D19      round     0.1092inch              32
 D20      round     0.1655inch              16
 D21      rectangle 0.0592inch x 0.0552inch    16
 D22      round     0.0378inch              93